For detailed information, other images and documents, please select individual articles from the following table.
Available in 1 version
Prices for customers after login
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Scar 3.5 is capable of welding 3.25-mm electrodes.
It can be used with 220-V sockets with a 16-AMP fuse.
Handy, comfortable shoulder bag so you can carry the generator anywhere.
The Scar 3.5 welder is equipped with PFC (Power Factor Correction) technology, which allows it to:
• Correct voltage waveform distortion
• Correct current waveform distortion
• Phase the voltage with the current
• Power the inverter with the constant voltage.
It also complies with the most stringent regulations on harmonic distortion (EN 61000-3-12) and ERP energy efficiency.
Energy savings of 30% compared to a normal inverter and 50% compared to SCR technology.
Technical data
Supply voltage 150/290 V
Phases 1
Frequency 50/60 Hz
Effective current (30%) 13.5 A
Effective power (30%) 2.9 KVA
Form factor 0.99
Idle voltage 90 V
Current range 5–160 A
Welding current 30% (25°C) 160 A
Welding current 60% (25°C) 125 A
Welding current 100% (25°C) 110 A
Welding current 30% (40°C) 160 A
Welding current 60% (40°C) 115 A
Welding current 100% (40°C) 100 A
Mechanical characteristics
Cable/Earth 25 mm²
Protection rating IP 23
Insulation class H
Cooling Air
Working temperature 40°C
Length x Width x
Height
440 x 160 x 340
Weight 8.5 kg
Data measured at a temperature of 40°C
Electrodes table
No. 2.5 mm Electrodes (20°C) = No limits
No. 3.25 mm Electrodes (20°C) = 10
No. 4 mm Electrodes (20°C) = 1
Advantages:
3.25 mm/4 mm ELECTRODE : The Scar 3.5's energy makes it possible to weld the 3.25mm electrode while plugged into a 16 A domestic socket. - LIGHT: Reduced bulk and dimensions allow transport of the generator in any situation. - FLY-BACK: Advanced electronic system of auxiliary input voltage (not traditional transformer) permits total control from all input power source voltages. - SCRATCH START TIG WELDING: Scratch start TIG welding is possible with corresponding TIG torch. Gas adjustment via convenient valve in the torch body. INFINITE LENGTH: The PFC technology's infinite flexibility permits the use of power cables up to 100 mt in length. This allows areas far away from the power outlet to be reached.
Advice:
Electrodes w/cable mm2 25 DINSE 50 connector and Earth cable mm2 25 DINSE 50 connector included
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!