For detailed information, other images and documents, please select individual articles from the following table.
Available in 3 versions
Prices for customers after login
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
The one-sided wood connectors are fixed with bolts which pass through the wood, the tooth plate connector and then through the steel beam that is being connected. After the hole has been drilled into the wood, the tooth plate connector is pressed into the wood. If necessary, use a hydraulic press-in tool.
Approval
The one-sided tooth plate connectors from BB Stanz- und Umformtechnik are subject to the harmonised standard DIN EN 14545
Design:
One side
Advice:
Steel quality
- S 250 GD + Z275
- Yield strength ReH ≥ 250 N/mm²
- Tensile strength Rm ≥ 320 N/mm²
- Breaking elongation A80 ≥ 19 %
- Corrosion protection of 275 g/m² on both sides - corresponds to a zinc layer thickness of approx. 20 μm
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!