FEMALE FLAT-FACE QUICK COUPLINGS FIRG

FIRG female coupling made from carbon steel encased with sealing gaskets made from NBR.
The flat face reduces play between the parts caused by pressure thrusts.
Flow: greater than 1,000 L/min.
Standard BSP thread (BS5200).
Operating temperature: -20 °C to +100 °C

Application area:

Agriculture, Industry, Earth moving, Hydraulic equipment

Field of Application:

-FASTER FFH
-PARKER FEM

Advantages:

-Clean the surface of the couplings before connecting to avoid contamination of the lines;
-Insert the male coupling inside the female one;
-After insertion, rotate the ring nut to avoid accidental disconnection;
-To disconnect, rotate the ring nut again up to the groove and push the coupling back.
-The connection/disconnection must be carried out WITH NO residual pressure.

Instructions:

-Clean the surface of the couplings before connecting to avoid contamination of the lines;
-Insert the male coupling inside the female one;
-After insertion, rotate the ring nut to avoid accidental disconnection;
-To disconnect, rotate the ring nut again up to the groove and push the coupling back.
-The connection/disconnection must be carried out WITH NO residual pressure.

Advice:

Compliant with ISO 16028
“Max pressure” means when the couplings are coupled