Chemical injection mortar VMZ
VMZ chemical injection mortar coaxial cartridge with mixer nozzle 420 ml
For securing medium to heavy loads in cracked and uncracked concrete
Register now and access more than 125,000 products
For securing medium to heavy loads in cracked and uncracked concrete
The VMZ injection system is a bonded expansion anchor comprising a two-component, styrene-free composite mortar and a special anchor rod with nut and washer. The load is transferred via the mechanical interlocking of individual anchor rod cones in the mortar and also via a combination of retention and frictional forces in the concrete.
Field of Application:
For anchoring heavy loads, such as steel beams, steel supports, railings (also bridges), brackets, façades etc. in cracked and non-cracked standard concrete with a strength class of ≥ C20/25 and ≤ C50/60.
Advantages:
- Anchor rod expansion cones enable high loads in cracked and uncracked concrete
- Low expansion pressure allows low spacing and edge distance
- Can be used in wet and dry concrete, drilling diameter ≥ 14 mm even in drill holes filled with water
- Drill hole is sealed as well as possible after curing
- High temperature resistance (permanently up to +72°C, briefly up to +120°C)
- Opened cartridges can be re-used if they are re-sealed with the end cap
- Can also be used in concrete < C20/25 and in hard natural stone without construction permit
- For hammer-drilled drill holes, including under seismic action (SEISMIC C1 and C2)
- Diamond-drilled drill holes possible (for VMZ-A from M10/for VMZ-IG from M12)
Content remark:
Coaxial cartridge, incl. mixer nozzle
 | |
Type description | Chemical injection mortar VMZ 420 |
Chemical basis | Vinylester, styrene free |
Content remark | Coaxial cartridge, incl. mixer nozzle |
Shelf life from production | 18 Month |
Contents | 420 ml |
Number of pieces per covering box | 12 PCS |
