Chemical injection mortar VMU plus Polar

Injection system for universal use in cracked and non-cracked concrete (ETA-11/0415), and masonry made from solid brick and perforated brick (ETA-13/0909) at low temperatures

The VMU plus Polar injection system is a bonded anchor system for the winter season, comprising the two-component,
styrene-free composite mortar VMU plus Polar and various system components that must be used depending on the building material and application.

Field of Application:

Advantages:

• One chemical injection mortar for almost all applications means more flexibility,


• less stock and safer application


• Approved for cracked (M 8 to M 30) and non-cracked concrete (M 8 to M 30)


• Approved for use in wet concrete and drill holes filled with water (M 8 to M 16)


• Approved for solid and perforated brick masonry


• Approved for commercially available threaded rods with a proof of strength (acceptance test certificate 3.1)


• Surface temperature during application: -20 °C to +10 °C (concrete)


• Ambient temperature when fully cured -40°C to +120°C (in concrete)


• Variable anchor depths for greater flexibility


• Fire protection test


• Opened cartridges can be used again with a new mixer nozzle


• Styrene-free 2-component vinyl ester-based mortar


• Approved for use during seismic activity in performance category C1 (M 8 to M 30)


• Products bearing the NSF logo have been tested and registered by the National Sanitary Foundation (NSF). NSF is the only international registration that guarantees that the product can be used in the food industry without posing health risks


• Quick and reliable curing even at low temperatures and sub-zero temperatures


• Approved for cracked and uncracked concrete and masonry even at a freezing processing temperature of -20 °C


• Approved temperature range of +10 °C to -20 °C for drill hole and cartridge temperature. No need to spend time heating the cartridge before processing and then keep it warm


• Identical European Technical Assessment (ETA 11-0415 and 13-0909) for VMU plus and VMU plus Polar, permitting installation at a borehole temperature of between +40 °C and -20 °C without re-assessment.

Advice: