Cavity anchor UNI
RECA cavity anchor UNI for panel thickness 10-70 mm, drill hole 13 mm M4
Universal mounting solution in particle boards
Register now and access more than 125,000 products
Universal mounting solution in particle boards
Universal cavity anchor for quick and easy mounting in particle boards
Application area:
For attachment in gypsum plasterboard, lightweight panels, fibre cement cladding, hollow block bricks
Field of Application:
For attaching electrical appliances, lighting, wall pictures, rails, shelves etc.
Advantages:
Universal application for board thicknesses of 10-70 mm
Quick and easy fitting without setting tool
Large load supporting surface ensures good holding power
All types of metric screw heads can be used
Immediate load-bearing capacity
Advice:
Min. clearance behind panel: 51 mm
Insert screws by hand with minimal contact pressure
Screws are not included in scope of delivery
Plate thickness: 10–70 mm
Type description | Cavity anchor UNI |
Thread type x anchor diameter | M4 |
Min./max. board thickness/mirror thickness (d a) | 10-70 mm |
Nominal drill hole diameter | 13 mm |
Recommended tensile load in plasterboard 9,5 mm | 0.07 kN |
Recommended tensile load in plasterboard 2 x 9,5 mm | 0.15 kN |
Recommended tensile load in plasterboard 12,5 mm | 0.15 kN |
Recommended tensile load in plasterboard 2 x 12,5 mm | 0.30 kN |
Surface | Zinc plated |
Material | Steel / plastic |
Datasheets (0)
Certificates/ Documents (0)
