Bonding bridge resin
Bonding bridge resin 5 L
Highly adhesive bonding bridge for cement on old cement, plaster walls.
Register now and access more than 125,000 products
Highly adhesive bonding bridge for cement on old cement, plaster walls.
Plasticiser additive for concrete, mortars and cement glue. Milky fluid formulated with aqueous-based copolymers.
Miscible in water and stable in alkaline media, which means that it is compatible with cement, lime and with all hydraulic binders in general.
Gives mortars greater adhesion, greater plasticity and waterproofs the paste. Characterised by a permanent "TAC" even several days after application.
HOW TO USE
As a primer: Can be applied as supplied or can be diluted with 10% water; the yield is 8 to 10 m2/litre. The surface must be clean and free from dust and grease. Can be applied by roller, brush or spray. Once applied, it can be coated immediately or after 1–2 days.
As a paste additive: For a 25-kg bag of cement, add 1.5 litres of the product to the mixing water, blending the mixture well.
Application area:
Creates a high tack layer when applied to cement surfaces, which serves as a joint/primer for mortar/cement. Greater plasticity (frost resistance) is achieved. Improves adhesion of cement adhesives on wood. Can be applied as waterproofing for drywall supports before tiling. Improves mortar/cement adhesion on plaster.
Advice:
STORAGE:
Avoid frost and temperatures above 35ºC. The product can be stored for one year when stored in original, closed containers and sheltered places.
Datasheets(X)
Last viewed
ultra replacement blade
30 T HYDRO-PNEUMATIC LIFTING JACKS
O-rings, ISO 3601, NBR 70, imperial
Backing pad with cooling fins
BEARING FOR INTERMEDIATE PLATE
EXTREME HSS-Co8 hole saw
RAPID® 2000 chipboard screw with milling pocket head, yellow
HSS-Co twist drill bit DIN 1897
Cleaning brush made from stainless steel wire
EVO HSS twist drill bit DIN 338