BZ plus zinc-plated steel Fixanchor
BZ plus stud anchor, steel, galvanised M16 x 15-35/135
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
Register now and access more than 125,000 products
For quick and reliable anchoring of medium to heavy loads in cracked and uncracked concrete
The stud anchor BZ plus is a force-controlled expanding dowel for quick mounting. When the hexagon nut is tightened, the stud is pulled into the expansion clip and clamps it effectively against the drill hole wall.
Application area:
For anchoring medium to heavy loads in cracked and uncracked concrete: Supports, steel girders, railing fastenings, cable conduits, pipe conduits, timber constructions, brackets. Fastenings in earthquake regions and similar
Load range: 2.4 kN - 65.1 kN
Concrete grade: C20/25-C50/60
Advantages:
- High permissible loads, low spacing and edge distance
- Quick and easy installation
- Immediate load-bearing capacity - no waiting
- Two effective anchorage depths for greater flexibility
Datasheets(X)
 | |
Type description | BZ 16-15-35/135 |
Anchor diameter x anchor length (l) | 16.0 x 135 mm |
Max. attachment height (t fix) | 15 mm |
Max. attachment height reduced (t fix, red) | 35 mm |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 1) | 110 mm |
Drill hole depth reduced (h 1, red) | 90 mm |
Embedding depth (h nom) | 97 mm |
Embedding depth (h nom,red) | 77 mm |
Effective anchoring depth (h ef) | 85 mm |
Effective anchoring depth reduced (h ef, red) | 65 mm |
Thread diameter x thread length (metric thread) | 16.0 x 56 mm |
Width across flats | 24 mm |
Torque during anchoring (T inst) | 90 Nm |
Minimum component thickness (h min) | 140 mm |
Minimum component thickness for reduced anchoring depth (h min) | 140 mm |
Through-hole in the component to be connected (d f) | 18 mm |
Material | Steel |
Material of bracing clip | Stainless steel A2 |
Surface | Zinc plated |
Anchor diameter | 16 mm |
Anchor length (l) | 135 mm |
Thread diameter | 16 mm |
Thread length (metric thread) | 56 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Extreme twist drill bit
HSS-Co twist drill bit DIN 1897
Extension for cleaning brushes IG M6
SCAR 820 PAPER ROLL
EXTREME mounts for hole saws
Stud screw, 4.8, galvanised
End mill 4 Z
arecal pipe thread sealant with PTFE
MagicRing L-shaped hex key, long version - hexagon/ball head
1/4 inch PZ recess torsion bit