ASSORTMENT OF METAL-RUBBER SEALING RINGS METRIC SIZES
Assorted metal rubber sealing rings metric sizes
Register now and access more than 125,000 products
Assorted metal rubber sealing rings metric sizes
The metal-rubber rings are self-sealing elements. They are not stopping devices, however and are therefore not suitable for dynamic applications. They are composed of a galvanised steel plain washer with a vulcanised oil-resistant synthetic rubber trapezoid section seal inside the internal diameter. They are normally used for the sealing of hexagonal head screws without through holes, Whitworth hexagonal head screws with through holes and round slotted head metric screws. Their primary application is in the field of hydropneumatics and in general mechanics. Resistant to mineral oils, water, air, emulsions, petrol and diesel. Thermal resistance: 120°C . Installation: surfaces must be completely flat. They must be installed in such a way that the rubber rests directly on the thread when compressed. For a perfect seal, through holes should not be bevelled, but must be well deburred. To centre the sealing ring, countersink the hole. Can be used several times if correctly fitted.
Datasheets(X)
 | |
Number of pieces | 440 |
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
